LED Strip Lighting
LED strip is how you get that soft glow under kitchen cabinets, behind a bedhead, along stair treads or inside shelving. It's simple once you know the parts: the strip, a driver to power it, and usually an aluminium profile to hide the dots. We stock strip and accessories from Domus, Havit, SAL and Robus.
Getting it right the first time
- 12V or 24V24V strip handles longer runs with less fade at the far end. For runs over about 5 m, 24V is the safer choice.
- Driver sizeMultiply the strip's watts per metre by its length, then allow about 20% headroom.
- No dotsCOB strip, or a profile with a diffuser, gives a smooth line of light instead of visible LED dots.
- Colour3000K for warm accent lighting, 4000K for task lighting under kitchen cabinets.
Questions we get asked
Do I need an electrician for LED strip lighting?
Plug-in kits can be DIY. Anything wired into the mains, including drivers hidden in cabinetry, needs a licensed electrician.
Can LED strip be dimmed?
Yes, with a dimmable driver and a matching dimmer or controller. Check the driver listing to be sure.
Can I cut LED strip to length?
Yes, at the marked cut points along the strip. Plan your runs around those points so you don't waste a section.
Need a driver? See our LED drivers. Send us your room size or a photo and we'll point you in the right direction. Call 02 4040 0599 or email sales@alstra.lighting.
