SAL PIXIE SMS861CD/BTAM Smart Indoor PIR Motion Sensor

The SAL PIXIE SMS861CD/BTAM is a smart ceiling-mounted PIR motion sensor designed to provide automatic lighting control through the SAL PIXIE smart home system. Its clean white circular profile can be recessed into the ceiling or surface mounted, making it suitable for both new installations and retrofit projects. Hold time and ambient light settings can be adjusted using the physical controls or PIXIE app, while three operating modes allow the connected load to run automatically, remain switched on or remain switched off. It is ideal for hallways, stairways, laundries, walk-in wardrobes, pantries, garages, offices, meeting rooms, storerooms and commercial common areas. Its discreet appearance complements modern, contemporary, minimalist, architectural and commercial interiors.

• SAL PIXIE master device
• Smart indoor PIR motion sensor
• Ceiling-mounted design
• Suitable for recessed or surface-mounted installation
• Surface mount and recessed mount components included
• 360 degree motion detection
• Detection range up to 8 metres in diameter
• Detection performance based on a 4 metre mounting height
• Recommended mounting height from 2.2 to 4 metres
• Adjustable hold time from 10 seconds to 30 minutes
• Adjustable brightness threshold from less than 10 to 2000 lux
• Hold time and brightness threshold adjustable through physical controls
• Settings can also be adjusted through the PIXIE app
• Three selectable operating modes
• Motion sensor mode
• Override on mode
• Override off mode
• Operating modes can be selected through the app or a compatible PIXIE secondary device
• Maximum 400VA LED load
• Maximum 800W incandescent or halogen load
• Maximum 100VA fan motor load
• No minimum load requirement
• Three-wire design
• Approximately 30 second warm-up time
• Suitable for movement speeds from 0.6 to 1.5 metres per second
• 240V input voltage
• Non-dimmable
• IP20 rated for indoor use
• White body finish
• Suitable for hallways, stairways, laundries, wardrobes, pantries and garages
• Ideal for offices, meeting rooms, storerooms and commercial common areas
• Complements modern, contemporary, minimalist, architectural and commercial interiors
• 72mm ceiling cut-out
• 93mm overall diameter
• 28mm overall height
• Product code SMS861CD/BTAM
• Must be installed by a qualified electrical installer

Click here for Data Sheet